Your position:Home >> Products and Service >> DOS

Relative Molecular mass:426.68
Application Guide:
1.DOS is an excellent cold-resistant plasticizer, with high plasticizing efficiency, high stability and low volatility. Except good cold-resistance, it also has good heat-resistance, light-resistance, electric and insulation, suitable for PVC, EVC, polystyrene and synthetic rubber resins.
2. Especially suitable for the production of cold-resistant wire, cable material, luxury food, meat plastic wrap, artificial leather, thin film, conveyer belt, board, sheet, etc. Usually be used with PA esters.
3. As the low-temperature plasticizer for synthetic rubbers, DOS has no effect on the vulcanization of rubber.
Product Standards:

NO.

Test Item

Superior Grade

First

Grade

Qualified

Grade

Our typical

Value

1

Appearance

Transparent

Oily liquid without visible impurity

Transparent

Oily liquid without visible impurity

Transparent

Oily liquid without visible impurity

Transparent

Oily liquid without visible impurity

2

Chroma,(Platinum-Cobalt)

≤20

≤30

≤60

≤20

3

Ester content

≥99.5

≥99.0

≥99.0

≥99.5

4

Density(20°),g/cm3

0.913-0.917

0.913-0.917

0.913-0.917

0.913-0.917

5

Acid value

≤0.04

≤0.07

≤0.10

≤0.04

6

Flashing Point

≥215

≥210

≥205

≥215

7

Moisture content

≤0.05

≤0.05

≤0.10

≤0.05

Relative Molecular mass:426.68
Application Guide:
1.DOS is an excellent cold-resistant plasticizer, with high plasticizing efficiency, high stability and low volatility. Except good cold-resistance, it also has good heat-resistance, light-resistance, electric and insulation, suitable for PVC, EVC, polystyrene and synthetic rubber resins.
2. Especially suitable for the production of cold-resistant wire, cable material, luxury food, meat plastic wrap, artificial leather, thin film, conveyer belt, board, sheet, etc. Usually be used with PA esters.
3. As the low-temperature plasticizer for synthetic rubbers, DOS has no effect on the vulcanization of rubber.
Product Standards:

NO.

Test Item

Superior Grade

First

Grade

Qualified

Grade

Our typical

Value

1

Appearance

Transparent

Oily liquid without visible impurity

Transparent

Oily liquid without visible impurity

Transparent

Oily liquid without visible impurity

Transparent

Oily liquid without visible impurity

2

Chroma,(Platinum-Cobalt)

≤20

≤30

≤60

≤20

3

Ester content

≥99.5

≥99.0

≥99.0

≥99.5

4

Density(20°),g/cm3

0.913-0.917

0.913-0.917

0.913-0.917

0.913-0.917

5

Acid value

≤0.04

≤0.07

≤0.10

≤0.04

6

Flashing Point

≥215

≥210

≥205

≥215

7

Moisture content

≤0.05

≤0.05

≤0.10

≤0.05